X-ray photoelectron spectroscopy and differential capacitance study of thiol-functional polysiloxane films on gold supports

Polymeric molecules containing multiple thiol groups (polythiols) provide tenacious attachment to metal surfaces such as gold. Polythiol films are also well suited for subsequent derivatization with biomacromolecules through remnant free thiol groups of the film. In this study, 1-3 nm thick layers of a commercial polythiol, poly((mercaptopropyl)methylsiloxane) (PMPMS), are investigated with X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy. XPS is used to reveal the surface coverage of thiolate-Au bonds between the polythiol and the metal support, which is found to be approximately 30% lower than that in alkanethiol self-assembled monolayers. The surface density of thiolate-Au bonds did not depend on film thickness provided sufficient PMPMS material was present. Differential capacitance measurements show that the effective dielectric barrier presented by PMPMS films under aqueous environments corresponds closely to their physical thickness, with even approximately 1 nm films remaining impermeable to electrolyte species. Modification of the films with an oligoethylene glycol compound was also examined, in anticipation of future applications in label-free, impedance-based biomolecular diagnostics.     

A new approach to phosphoserine and phosphothreonine analysis in peptides and proteins: chemical modification,enrichment via solid-phase reversible binding,and analysis by mass spectrometry

beta-Elimination of the phosphate group on phosphoserine and phosphothreonine residues and addition of an alkyldithiol is a useful tool for analysis of the phosphorylation states of proteins and peptides. We have explored the influence of several conditions on the efficiency of this PO(4)(3-) elimination reaction upon addition of propanedithiol. In addition to the described influence of different bases, the solvent composition was also found to have a major effect on the yield of the reaction. In particular, an increase in the percentage of DMSO enhances the conversion rate, whereas a higher amount of protic polar solvents, such as water or isopropanol, induces the opposite effect. We have also developed a protocol for enrichment of the modified peptides, which is based on solid-phase covalent capture/release with a dithiopyridino-resin. The procedure for beta-elimination and isolation of phosphorylated peptides by solid-phase capture/release was developed with commercially available alpha-casein. Enriched peptide fragments were characterized by MALDI-TOF mass spectrometric analysis before and after alkylation with iodoacetamide, which allowed rapid confirmation of the purposely introduced thiol moiety. Sensitivity studies, carried out in order to determine the detection limit, demonstrated that samples could be detected even in the low picomolar range by mass spectrometry. The developed solid-phase enrichment procedure based on reversible covalent binding of the modified peptides is more effective and significantly simpler than methods based on the interaction between biotin and avidin, which require additional steps such as tagging the modified peptides and work-up of the samples prior to the affinity capture step.     

Plasma fluorination of polyolefins

ESCA and contact angle measurements were used to characterize the surfaces of Polyethylene and polypropylene films exposed to SF₆, CF₄, and C₂F₆ plasmas. None of these gases polymerized in the plasma. However, all plasma treatments grafted fluorinated functionalities directly to the polymer surfaces. SF₆ plasmas graft fluorine atoms to a polyolefin surface. CF₄ plasmas also react by a mechanism dominated by fluorine atoms, but with some contribution from CF_x-radical reactions. Although C₂F₆ does not polymerize, the mechanism of grafting is still dominated by the reactions of CF_x radicals. For all gases studied, the lack of polymerization is attributed to competitive ablation and polymerization reactions occurring under conditions of ion bombardment.     

Action of photoreactivating light on pyrimidine heteroadduct in bacteria

Abstract— In stationary-phase Escherichia coli B/r, photoreactivation (PR) at 313 nm of ultraviolet (u.v.) killing is inefficient compared with PR at 405 nm, and can be explained solely by photoenzymatic reversal of pyrimidine dimers. In Staphylococcus epidermidis, PR shows a maximum at 313 nm, suggesting that this organism shows the Type III PR proposed by Jagger et al.[5] for Streptomyces strains. Reversal of pyrimidine dimers is not sufficient to explain this PR. The mechanism of Type III PR remains unknown. With both S. epidermidis and E. coli B/r, the amount of uracil–thymine heteroadduct in DNA hydrolysates decreases if the cells are given a post-u.v. treatment at 313 nm, but no decrease is observed if the post-u.v. treatment is at 405 nm. The biological significance of this adduct and of its removal is not clear. It may play a role in Type III PR.     

THE EFFECTS OF HOST-CELL REACTIVATION ON ASSAY OF U.V.-IRRADIATED HAEMOPHILUS INFLUENZAE TRANSFORMING DNA

Abstract— The host cell reactivation (HCR) mechanism in Haemophilus influenzae cells is inhibited by sub-microgram concentrations of acriflavine (as is already known to be true for Escherichia coli ). Exposure of these cells to similar concentrations of the drug during bacterial transformation increases the apparent ultraviolet light (u.v.) sensitivity of previously irradiated transforming DNA, indicating a repair of this DNA after uptake by the cells under normal conditions. Repair is inhibited by applying acriflavine at any time up to one hour after competent cells contact the irradiated transforming DNA. The fraction of the u.v. damage repaired by HCR is very different for different genetic markers. Those markers which are most u.v. sensitive when assayed in the absence of acriflavine are most poorly repaired, suggesting that this is the reason for their higher sensitivity. For all markers the fraction of the damage repairable by in vitro photoreactivation is approximately constant, and strongly overlaps the damage repairable by HCR. The degree of HCR achieved can be altered by experimental treatment of the H. influenzae DNA prior to transformation. Thus treatment of irradiated DNA with an enzyme from Micrococcus lysodeikticus –known to attack u.v. damaged, but not undamaged DNA–prevents subsequent intracellular repair of the same u.v. lesions whose repair is inhibited by acriflavine. Similarly, partial replacement of the thymine in transforming DNA by 5-bromouracil (BU) strongly inhibits repair of subsequent u.v. damage. As in bacteriophage, the BU effect is relieved if the u.v. exposure occurs in the presence of cysteamine. It is clear that intracellular repair must be considered in interpreting experiments with u.v.-irradiated transforming DNA.     

Transient response of a Brownian particle with general damping

We study the transient response of a Brownian particle with general damping in a system of metastable potential well. The escape rate is evaluated as a function of time after an infinite wall is removed from the potential barrier. It takes a relaxation time for the rate to reach its limit value and this rate relaxation time differs from the relaxation time of the majority of the probability around the bottom of the potential well. The rate relaxation time is found to depend on the temperature as well as the damping constant. It involves the diffusion time and the instanton time, in general agreement with recent studies of the overdamped case by Bier et al. [Phys. Rev. E 59, 6422 (1999)].     

Synthesis of Novel Nucleic Acid Mimics via the Stereoselective Intermolecular Radical Coupling of 3'-Iodo Nucleosides and Formaldoximes(1)

A highly convergent free radical coupling of alkyl iodides and oximes, mediated by bis(trimethylstannyl) benzopinacolate (8), has been utilized to prepare a series of dimeric nucleosides as mimics of natural nucleic acids. The systematic optimization of the reaction conditions allowed for the single-step conversion of the appropriate iodides and oximes into the 2'-deoxy dimers 9 in moderate to excellent yields. For example, the reaction of 3'-deoxy-3'-iodo-5'-(triphenylmethyl)thymidine (6a) with 3'-O-(tert-butyldiphenylsilyl)-5'-O-(methyleneimino)thymidine (7a) in the presence of 8 in degassed benzene gave an 81% yield of 3'-de(oxyphosphinico)-3'-(methyleneimino)-5'-O-(triphenylmethyl)thymidylyl-(3'-->5')-3'-O-(tert-butyldiphenylsilyl)thymidine (9a). Similarly prepared were dimers containing both pyrimidine (thymine, 5-methylcytosine) and purine (adenine, guanine) bases. The reaction was highly stereoselective, giving only a single dimeric species having the ribo-configuration of the newly introduced C-3'-branched methylene moiety. Also prepared were dimers 16, incorporating 2'-O-methyl ribonucleosides in both halves of the dimer. This required the synthesis of 3'-deoxy-3'-iodo-2'-O-methyl nucleosides 12 as well as 2'-O-methyl-5'-O-methyleneimino nucleosides 15. For example, 5'-O-(tert-butyldiphenylsilyl)-3'-deoxy-3'-iodo-2'-O-methyl-5-methyluridine (12e) was prepared in 80% yield by displacement of the corresponding triflate with Bu(4)NI. Also prepared were the suitably protected 3'-deoxy-3'-iodo adenosine and guanosine derivatives. Compounds 15 were prepared in high yield by a regioselective Mitsunobu reaction to give the corresponding 5'-O-phthalimido nucleosides 13, which were subsequently converted to the requisite oximes 15. In the 2'-O-methyl series, the pinacolate coupling reaction proceeded with efficiency equal to that observed for the 2'-deoxy series 9, but with slightly less stereoselectivity, giving predominantly the C-3'ribo products 16, contaminated with 5-25% of the epimeric material. Mixed base dimers containing both pyrimidine and purine bases at all possible positions, including purine-purine dimers were prepared. The hydroxylamine or methyleneimino (MI) backbone of several representative dimers so prepared was converted via methylation to give the corresponding methylenemethylimino (MMI)-linked compounds, which are novel phosphate surrogates for use in antisense oligonucleotides.     

Determination of ondansetron and its hydroxy metabolites in human serum using solid-phase extraction and liquid chromatography/positive ion electrospray tandem mass spectrometry

Ondansetron and its hydroxylated metabolites were determined in human serum using solid-phase extraction (SPE) and liquid chromatography/positive ion electrospray tandem mass spectrometry. Pyrimethamine was used as the internal standard. The analytes were eluted from the SPE cartridge using 2 x 1 ml of methanol containing 0.5% triethylamine, evaporated under vacuum and the residue was reconstituted in the mobile phase. The liquid chromatographic separation was achieved on a silica column using a mobile phase of aqueous 20 mM ammonium acetate (pH 4.7)-acetonitrile (85 : 15, v/v) at a flow-rate of 0.4 ml min(-1). The method was linear over the range 1-500 ng ml(-1) for ondansetron and each of the metabolites in human serum. The intra-day accuracy was better than 9.1% and the precision was <10.3%; the inter-day accuracy was better than 9.5% and the precision was <12.6%. The limit of detection was 250 pg ml(-1) based on a signal-to-noise ratio of 3. The absolute recovery from serum for all analytes was >90%.     

Fast semiempirical calculations

Most quantum chemists regard semiempirical methods as ephemeral and computationally cost efficient. For this reason, an article dealing with computational efficiency of semiempirical methods is probably very unfashionable. However, experience at a big computer installation, shared by ab-initio and semiempirical quantum chemists shows that the second group actually consumes more computer time than the first. Obviously, the greater size of the molecules in semiempirical calculations outweighs the inherent efficiency of these methods. The present article describes a simple method for accelerating SCF -type semiempirical methods.     

Chemical modification of fluorinated self-assembled monolayer surfaces by low energy reactive ion bombardment

Reactive collisions of low energy (<100-eV) mass-selected ions are used to chemically modify fluorinated self-assembled monolayer surfaces comprised of alkanethiolate chains CF₃(CF₂)₁₁(CH₂)₂S— bound to Au. Typical experiments were done by using 1-nA/cm² beams and submonolayer doses of reactant ions. Characterization of the modified surface was achieved by in situ chemical sputtering (60-eV Xe^+·) and by independent high mass resolution time-of-flight-secondary ionization mass spectrometry (TOF-SIMS) (15–25-keV, Ga⁺) experiments. Treatment with Si³⁵C1 ₄ ^+· produced a surface from which Xe⁺ sputtering liberated CF₂ ³⁵C1⁺ ions, which suggested Cl-for-F halogen exchange at the surface. Isotopic labeling studies that used Si³⁵Cl₂ ³⁷Cl ₂ ^+· ; and experiments with bromine-containing and iodine-containing projectiles, confirmed this reaction. High mass resolution TOF-SIMS spectra, as well as high spatial resolution images, provided further evidence as to the existence of halogen-exchanged species at the bombarded surface. Analogous Cl-for-F halogen substitution was observed in a model gas-phase reaction. The ion-surface reaction is suggested to proceed through an intermediate fluoronium ion in which the projectile is bonded to the target molecule. The most significant conclusion of the study is that selective chemical modification of monolayer surfaces can be achieved by using reactive ion beams, which lead to new covalent bonds at the surface and in the scattered ions.